Specification

This flocking machine is the outcome of adoption of new technologies and new processes after repeated test and research on the circuit board. Circuit inside the handle is with low power dissipation and high voltage output, makes this flocking machine quite strong flocking capacity. It is easy to operate, lightweight, and of long working life with rechargeable batteries.

Features:

Antiskid handle in suitable size for comfortable using

Solid and durable ABS plastic material

Handy and portable, mini beautiful shape

Strong flocking power

Chargeable: AC: 110/220V, 60/50Hz. Built-in chargeable and high power capacity battery, over 300 times recharging, overlong life.

Instruction:

1 When charging, slide the switch on OFF, push out the alternating plug and plug it into AC220 50Hz/220V 60Hz socket. It’s charging when the indicator light is on. Each charging needs 12 hours if with AC220 50Hz and 24 hours if with AC110V60Hz. After charging, the plug should be restored to the initial position. While charging, don’t slide the switch or touch the high voltage output wire in case of interior electronic component destruction and getting electric shock.

2 Put in half bottle of grass flocking is appropriate. Keep the high-voltage wire hanging on the bottle mouth so that it connects with the wire netting and thus in an energization state.

3 When flocking, slide the power switch on ON, press the button, the working indicator light is on, here wire netting is with 5000V high voltage direct current static (No touching!). Grasp the handle, wave up and down, under the static, the grass flocking in bottle can pass through the net and fall down vertically on the glue coating surface. After finishing, loosen the button, the indicator light is off and the wire netting is deenergized, but never touch it since it remains high voltage electricity.

4 Working time: Continuous flocking lasts for about 1 hour under full charging state.

5 Timely charging is needed after the power is run out. If long time no using this flocking machine, please charge for over 6 hours each time in every 3 months, otherwise, the battery life will be reduced.

6 Never use this machine when charging.

Safety caution:

1 Never connect earth wire with the wire netting in the bottle, which may cause short circuit and lead to explosion and fire

2 When charging, don’t slide the switch or touch the high-voltage wire in case of interior electronic component destruction and getting electric shock

3 This machine resembles a flashlight, but it’s not a toy, so please keep away from kids in case of electric shock

4 Timely charging is needed after the power run out, and never use it when charging. Keep away from combustible and explosive goods

5 Mustn’t be used in a place with combustible and explosive gas or liquid. The wire netting mustn’t contact any metal conducting material.

6 Keep the machine out of wet and damp, when it’s wet, the wire netting absorbs moisture and thus no high voltage output or getting low voltage which will affect the flocking. So keep the machine dry timely and the strong flocking power will recover.

7 Keep the power switch on OFF when you don’t use the machine.

Flocking steps:

1 Put half bottle grass flocking.

2 Put the high-voltage wire hanging on the bottle mouth so that it connects with the wire netting and thus in an energization state.

3 Coat with gluewater on the surface where you want to flocking.

4 Insert the ground wire into a place near the flocking surface.

5 Slide the power switch on.

6 Press the operation button and wave up and down.

7 Grass flocking will fall down vertically with the static.

8 Grass flocking will vertically and well-proportionedly grow on the glue-coated surface.

Steps 1: Steps 2:

Grass military uniform to the Bottle of high-voltage output lines

bottle for the right amount to half hanging in the side of the bottle, bottle

metal power

Steps 3: Steps 4:

Apply glue in place The ground inserted in the grass

in need of grass next to the place

Steps 5: Steps 6:

The power switch to Wobble up and down according

the NO position to the work of key

Steps 7: Steps 8:

Grass velvet in the role of Down vertically in the surface

electrostatic vertical spilled